You need to register your Gravio Hub or Hub PC with the Coordinator in order to make use of the Coordinator’s functionalities. Follow the steps below to register your Gravio Hubs:

1. In Gravio Studio

The Hubs in your account are automatically shown when you log into Gravio Studio.

Doubleclick on the Hub you want to add to the Coordinator, and then navigate to the settings tab on the far right:

The following Hub information is displayed:
- the Hub ID
- the HubKit IPv4
- the HubKit IPv6

You will need these to register with the Coordinator.

2. In Gravio Coordinator

Navigate to your Gravio Coordinator using a web browser and select “Hub” in the menu:

Click on the “Add” button at the top right of the list screen to register the Hub. Enter the data you have retrieved from the Hub using Gravio Studio above:

Enter any name for the server name, enter the Hub ID for server ID, HubKit IP [IPv4] for IPv4 address, and optionally the HubKit IP [IPv6] for IPv6.
For the HubKit Login Password, enter the password for the Authentication Account associated with Coordinator and click on register (see next chapter).

Once registered, this is what the hub will look like in the Coordinator:

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.