The PATLITE action component can control lights and play audio on Patlite network-enabled watch towers. The watch tower must support HTTP commands. For more information, please check the Patlite website. https://www.patlite.co.jp/

This component is convenient to control the lights and signals according to the information from the sensors.

Component Properties

IP Address Watch Tower IP Address
Red Controls the red lamp On / Off / Blink1 / Blink2 / No Change
Yellow Controls the yellow lamp On / Off / Blink1 / Blink2 / No Change
Green Control green lamp On / Off / Blink1 / Blink2 / No Change
Blue Control blue lamp On / Off / Blink1 / Blink2 / No Change
White Control white lamp On / Off / Blink1 / Blink2 / No Change
Play Sound Check to play audio
Sound Channel Specify the number of the channel to be played. For details, refer to the device manual. Example: 65
Repeat Specify an additional number of repeated playbacks. Leave blank if not repeated. Example: 1 will be played twice
Timeout API timeout

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment