| Note: This documentation refers to Gravio 3.8 or older. For Gravio 4 or newer, please refer to the respective documentation on doc.gravio.com . |
On this page, we will go through the process of setting up your Gravio Hub. We made it extremely simple to configure your new hub.
The following two steps are needed to get started:
- Configure the Gravio Hub to connect to your WiFi network
- Set your password
The Gravio Hub runs on a Linux based OS (Ubuntu). Resetting the password will ensure that your Gravio Hub is secured at Linux security grade if you choose a secure password.
There are two ways you can set up your Gravio Hub:
- You use the local wifi the Gravio Hub creates
- You can connect the USB-C adapter to the Gravio Hub, which allows you to connect a USB Keyboard, Mouse and an HDMI Screen. With this setup you can use the graphical user interface to configure your Gravio Hub.
The Gravio Hub comes with the following accessories:
The Gravio Hub
The USB-C adapter
The Gravio USB-C cable
The power supply
The Setup Process
Gravio Hub can be set up either via Wifi or via LAN. For the LAN setup, you will need a USB to Ethernet adapter, which you will connect to the USB-C Adapter. If you like to use camera feeds, we recommend you use the LAN connection.