|Note: This documentation refers to Gravio 3.8 or older. For Gravio 4 or newer, please refer to the respective documentation on doc.gravio.com .|
In the Timer tab you set up the various Actions that can be executed based on a set schedule or pattern. In order to set up Timers, please set up Actions first.
Click on the “+” button on the right top to create a new schedule.
Set the target Action, start date and the timings. Then set the recurrence and repetition or pattern of the schedule. The following options are available: “None”, “Interval”, “Hourly”, “Daily”, “Weekly”, “Monthly”.
Ensure that the schedule is activated (switch is green).