Hub Configuration View

Introduction » What is Gravio? » Hub Configuration View

If you double click on the upper half of the Server card, you will get to the Hub Configuration view: At the top you can find a number of buttons such as: A plus sign button to create new physical Areas to group your Layers An edit button to edit an Area or…

Gravio Hub

Gravio Hub

For the Gravio Standard package or higher, you get one or more Gravio Hubs. The Gravio Hub is the Edge Device that gathers all the data and processes. It is essentially a small computer. The specifications of the Gravio Hub are below: CPU: Rockchip RK3399 (6 core)…

Stopping the Gravio Hub

Gravio Hub » Stopping the Gravio Hub

Please shut down the Gravio Hub by pressing and holding the button next to the plug. Keep pressing the button until the Logo has cycled through Blue, then Yello, Red. Once on red, please release the button. The logo will turn off. Once the light is off, it means your…

Gravio Hub Led Light Status Indicators

Gravio Hub » Gravio Hub Led Light Status Indicators

The Gravio Logo on the Gravio Hub can light up in various colours and patterns. Here you can find what the colours mean and/or how you can trigger them. LED behaviour Context Meaning Comment Solid Blue Upon boot Out of the box…

Getting Started with the Gravio Hub

Gravio Hub » Getting Started with the Gravio Hub

On this page, we will go through the process of setting up your Gravio Hub. We made it extremely simple to configure your new hub. The following two steps are needed to get started: Configure the Gravio Hub to connect to your WiFi network Set your password The…

Connecting your Gravio Hub to the Network

Gravio Hub » Connecting your Gravio Hub to the Network

The Network Setup Process The first time you plug the Gravio Hub into a power source, it will create a wireless network. Use any device with a browser to connect to that Wifi Network: Log in using the password graviohub Now open your browser and enter the URL…

About Gravio Hub and Gravio Zigbee Receiver

Appendix » About Gravio Hub and Gravio Zigbee Receiver

The maximum number of devices that can be connected to the Gravio Hub and Gravio Zigbee receiver is 64.

Action Configuration View

Action Configuration View

The Gravio HubKits can trigger Actions. You can think of an Action like a small and simple computer program, that’s made up of Steps. Actions can be created in the Action Editor which can be opened by clicking on the Action Editor icon: You can find these…

Restricting access to the Gravio Hub from Gravio Studio

Appendix » Restricting access to the Gravio Hub from Gravio Studio

To restrict Gravio Studio access to the Gravio Hub, install the Gravio Studio client certificate used for the that particular Gravio Hub. Note: This feature is available only in Gravio Basic, Gravio Standard and Gravio Enterprise subscriptions. Log in to Gravio…

Gravio HubKits Overview

Gravio HubKits Overview

The Gravio’s HubKit Lists view in Gravio gives you an overview of all connected Edge HubKits available. These can be software servers from Linux, Windows or Macs where you have installed the Gravio HubKit, or they can be Gravio Hub devices. For information on how…

Performance Tuning

Gravio Hub » Performance Tuning

When using the Gravio Hub for inference computer vision detection, please consider the following: Processing Performance When an inference is selected as a “layer as a soft sensor” on a Gravio Hub, only one model should be used per Gravio…

Service Architecture

Introduction » Service Architecture

Gravio consists of the following application modules: Gravio Studio, a Windows, macOS and iOS application to view, edit and configure the server infrastructure. Gravio HubKit, a server software installed on the edge device (Windows, macOS or Linux) to retrieve…

Using the Gravio Coordinator

Advanced » Using the Gravio Coordinator

Because Gravio is a distributed system consisting of either computers (macOS, Windows or Linux) running the HubKit or the Gravio Hub itself, there is a need to coordinate those edge nodes. More information about the Gravio Coordinator can be found in the Gravio…

Maintenance and Software Updates

Gravio Hub » Maintenance and Software Updates

Once logged in, you can open the “Maintenance” tab on the top left to open the maintenance view: Once open, you see the following sections: Check Updates SSL Certificate Settings HubKit and Coordinator Data Backup Gravio Hub Power Management …

Sound Play

Action Configuration View » Action Components » Sound Play

The Sound Play component allows you to play a specified mp3 file.   Output payload Description cv.Payload Outputs the output payload of the previous component as is. (Pass-through) Component Properties Property name…

General Gravio Troubleshooting

Troubleshooting » General Gravio Troubleshooting

Symptom Explanation Remedy Comments Gravio Studio is not behaving as expected Gravio Server connection is unstable or Gravio Server is not running Ensure that there is a stable connection between Gravio Studio and the Server is…

Saving Media data path for Camera device

Appendix » Saving Media data path for Camera device

Images acquired from the camera by ONVIF or USB will be stored in the following directory for each camera device and stored in each date directory. Windows 10 C:/ProgramData/HubKit/mediadata Mac /Library/Application…

Setup on macOS

Introduction » Installation and Setup » Setup on macOS

Mac To use Gravio on Mac, you can install Gravio HubKit on your Mac. And you can install Gravio Studio for Mac for managing your Gravio HubKit. Run Gravio HubKit for Mac First, please download the Gravio HubKit dmg for Mac from this link. This is the Edge…

Adding Physical Sensor Devices

Introduction » What is Gravio? » Hub Configuration View » Device Tab » Adding Physical Sensor Devices

Gravio is built in a way that allows us to easily extend new sensor families. On the website https://www.gravio.com/product#Gravio-Rent you can see a range of hardware sensors Gravio supports off the shelf. If you require other sensors to be connected, please do not…

Gravio HubKit Data Directory

Appendix » Gravio HubKit Data Directory

When the Gravio HubKit is installed, it creates a data directory to store configuration files and data. On Windows 10 C:\ProgramData\HubKit\ On macOS /Library/Application Support/HubKit/ On Linux/Raspberry On Linux/Raspberry, the following directories are mounted…

File Write

Action Configuration View » Action Components » File Write

The File Write Action Component is to write data to a file. Component Properties Name Required Description Filename False Filename to be written. Append True Append new data instead of replacing the file.…

Adding EnOcean-enabled devices

Introduction » What is Gravio? » Hub Configuration View » Device Tab » Adding Physical Sensor Devices » Adding EnOcean-enabled devices

We have a Gravio USB dongle that can work with EnOcean sensor devices. On this page, we learn how to add those devices to Gravio Under “Devices”, select the type of EnOcean sensor you want to use (DataKind) and add a new area and layer.    …

Adding a compatible Bluetooth device

Introduction » What is Gravio? » Hub Configuration View » Device Tab » Adding Physical Sensor Devices » Adding a compatible Bluetooth device

Use Gravio Studio to connect the sensor receiver and layer of a Bluetooth-enabled device. Under “Devices”, select the type of Bluetooth sensor you want to use (DataKind) and add a new area and layer.    As a sample, use OMRON’s 2JCIE-BU01 to…

Upgrading to HubKit 4.3 on Linux / Raspberry Pi

Introduction » Installation and Setup » Upgrading to HubKit 4.3 on Linux / Raspberry Pi

To upgrade HubKit or Coordinator, please follow the procedure below. In a nutshell, we have migrated from a docker-based installation to a .deb package. This document guides you through the process of upgrading HubKit 4.2 version to 4.3 on Linux / Raspberry…

WriteToExcel365

Action Configuration View » Action Components » WriteToExcel365

The WriteToExcel365 component can output data to a OneDrive in Excel format. The use of this component requires a contract and pre-configuration of Office365 for Business and OneDrive for Business. How to prepare your Microsoft account Prepare an Office365…

Settings Tab

Introduction » What is Gravio? » Hub Configuration View » Settings Tab

In the Settings tab you can manage various settings aspects such as view the hubkit’s versions, backup or restore, set the base property profiles, deploy image inference models or view the disk usage space. If you have the enterprise version, you can also connect…

How to create a machine learning model for computer vision object recognition

Advanced » How to create a machine learning model for computer vision object recognition

One of the big new features of Gravio 4 is the way you can create inference files to use Artificial Intelligence and Machine Learning to detect objects in visual feeds, such as from CCTV security camera systems based on ONVIF. Please refer to the ONVIF section of this…