Gravio Hub

Gravio Hub

For the Gravio Standard package or higher, you get one or more Gravio Hubs. The Gravio Hub is the Edge Device that gathers all the data and processes. It is essentially a small computer. The specifications of the Gravio Hub are below: CPU: Rockchip RK3399 (6 core)…

Hub Configuration View

Introduction » What is Gravio? » Hub Configuration View

If you double click on the upper half of the Server card, you will get to the Hub Configuration view: At the top you can find a number of buttons such as: A plus sign button to create new physical Areas to group your Layers An edit button to edit an Area or…

Stopping the Gravio Hub

Gravio Hub » Stopping the Gravio Hub

Please shut down the Gravio Hub by pressing and holding the button next to the plug. Keep pressing the button until the Logo has cycled through Blue, then Yello, Red. Once on red, please release the button. The logo will turn off. Once the light is off, it means your…

Gravio Hub Led Light Status Indicators

Gravio Hub » Gravio Hub Led Light Status Indicators

The Gravio Logo on the Gravio Hub can light up in various colours and patterns. Here you can find what the colours mean and/or how you can trigger them. LED behaviour Context Meaning Comment Solid Blue Upon boot Out of the box…

Getting Started with the Gravio Hub

Gravio Hub » Getting Started with the Gravio Hub

On this page, we will go through the process of setting up your Gravio Hub. We made it extremely simple to configure your new hub. The following two steps are needed to get started: Configure the Gravio Hub to connect to your WiFi network Set your password The…

Connecting your Gravio Hub to the Network

Gravio Hub » Connecting your Gravio Hub to the Network

The Network Setup Process The first time you plug the Gravio Hub into a power source, it will create a wireless network. Use any device with a browser to connect to that Wifi Network: Log in using the password graviohub Now open your browser and enter the URL…

About Gravio Hub and Gravio Zigbee Receiver

Appendix » About Gravio Hub and Gravio Zigbee Receiver

The maximum number of devices that can be connected to the Gravio Hub and Gravio Zigbee receiver is 64.

Restricting access to the Gravio Hub from Gravio Studio

Appendix » Restricting access to the Gravio Hub from Gravio Studio

To restrict Gravio Studio access to the Gravio Hub, install the Gravio Studio client certificate used for the that particular Gravio Hub. Note: This feature is only available for Basic users. Log in to Gravio Cloud with Gravio Studio and select “Client…

Performance Tuning

Gravio Hub » Performance Tuning

When using the Gravio Hub for inference computer vision detection, please consider the following: Processing Performance When an inference is selected as a “layer as a soft sensor” on a Gravio Hub, only one model should be used per Gravio…

Using the Gravio Coordinator

Advanced » Using the Gravio Coordinator

Because Gravio is a distributed system consisting of either computers (macOS, Windows or Linux) running the HubKit or the Gravio Hub itself, there is a need to coordinate those edge nodes. More information about the Gravio Coordinator can be found in the Gravio…

Maintenance and Software Updates

Gravio Hub » Maintenance and Software Updates

Once logged in, you can open the “Maintenance” tab on the top left to open the maintenance view: Once open, you see the following sections: Check Updates SSL Certificate Settings HubKit and Coordinator Data Backup Gravio Hub Power Management …

Saving Media data path for Camera device

Appendix » Saving Media data path for Camera device

Images acquired from the camera by ONVIF, etc. will be stored in the following directory for each camera device and stored in each date directory. Windows 10 C:/ProgramData/HubKit/mediadata Mac /Library/Application…

Setup on Linux / Raspberry Pi

Introduction » Installation and Setup » Setup on Linux / Raspberry Pi

Linux / RaspberryPI Download the Linux docker files as zip package from download site. Connect to Ubuntu 18.04 LTS using SSH. Transfer the downloaded zip package (coordinatorsetup_linux_v4_2.zip) to Ubuntu. Execute the following Command from Console. sudo apt…

Service Architecture

Introduction » Service Architecture

Gravio consists of the following application modules: Gravio Studio, a Windows, macOS and iOS application to view, edit and configure the server infrastructure. Gravio HubKit, a server software installed on the edge device (Windows, macOS or Linux) to retrieve…

General Gravio Troubleshooting

Troubleshooting » General Gravio Troubleshooting

Symptom Explanation Remedy Comments Gravio Studio is not behaving as expected Gravio Server connection is unstable or Gravio Server is not running Ensure that there is a stable connection between Gravio Studio and the Server is…

Gravio HubKits Overview

Gravio HubKits Overview

The Gravio’s HubKit Lists view in Gravio gives you an overview of all connected Edge HubKits available. These can be software servers from Linux, Windows or Macs where you have installed the Gravio HubKit, or they can be Gravio Hub devices. For information on how…

Setup on macOS

Introduction » Installation and Setup » Setup on macOS

Mac To use Gravio on Mac, you can install Gravio HubKit on your Mac. And you can install Gravio Studio for Mac for managing your Gravio HubKit. Run Gravio HubKit for Mac First, please download the Gravio HubKit dmg for Mac from this link. This is the Edge…

Adding Physical Sensor Devices

Introduction » What is Gravio? » Hub Configuration View » Device Tab » Adding Physical Sensor Devices

Gravio is built in a way that allows us to easily extend new sensor families. On the website https://www.gravio.com/product#Gravio-Rent you can see a range of hardware sensors Gravio supports off the shelf. If you require other sensors to be connected, please do not…