Images acquired from the camera by ONVIF or USB will be stored in the following directory for each camera device and stored in each date directory.
On Linux/Raspberry, since it runs on Docker, the following directories are mounted as volumes
When viewed from within Docker, the directory is
If you like the path of the image to be stored in the sensor database, you will need to add a Camera layer and assign the camera to that layer. Note, for data to be captured in the database, it needs to be in a layer.
Also if you like your harddisk not to be filled up, you can set the amount of days the pictures should be stored under “Settings” then “Disk Management”.
You can find more about how to setup a ONVIF Camera by watching this video: https://www.youtube.com/watch?v=8dkSIz_5810
Need more help with this?
Join our slack community for help