This section describes the installation of Gravio Hub 2.
To use Gravio Hub 2, the following three points are necessary:
Gravio Hub 2 operates on a Linux OS based on Ubuntu 2004. It is designed to allow you to log in to Linux OS as needed. For this reason, in the initial settings of the Gravio Configuration Manager to enhance security, you will be forced to change the password of the login account for logging into Linux. Please prepare the settings for the WiFi network (the network name to be connected and the password) and the new password for the login account.
Note: Please store the login account name and password safely. If you lose the password, you will not be able to log in to the Linux machine again and may have to reset it, which may cause data loss.
The following accessories, including Gravio Hub, are included with Gravio Hub 2 package:
- The Gravio Hub 2 device:
- Gravio USB-C cable
- The power adapter
Gravio Hub 2 has one USB-A connector, USB-C connector, wired LAN connector, and HDMI connector each.
Need more help with this?
Join our slack community for help