Updating to Gravio 5.4 requires that the Configuration Manager is updated for 5.4.
At night, at 2:00 AM, the Gravio Hub 2 will automatically update itself if it is connected to the internet.
In this case, it is not necessary to manually set the Configuration Manager to 5.4.
Log in with the Configuration Manager at http://:8080 and update the HubKit.
Update procedure if Gravio Hub 2 is not connected to the internet at 2:00 AM at night
1.) Prepare your network environment so that the Gravio Hub 2 can access the internet.
2.) Log in to the console with the “gravio” account.
3.) Execute the command cd /opt/graviohub
.
4.) Execute the command sudo . /uum.sh
This will update the Configuration Manager for 5.4.
Then login with the configuration manager and update the HubKit.
After the update, If you can not run Configuration Manager.
Please execute the following commands in the terminal:
sudo apt --fix-broken -y install
sudo systemctl restart updatemanager
After entering these commands, reboot your Gravio Hub 2.
Need more help with this?
Join our slack community for help