Connecting Gravio and IVAR

In order to link Gravio and IVAR, Log into IVAR using your admin account:

4. Setting IVAR in Gravio Studio

Select the System menu to open the About menu and copy the IVAR Information ID including {}.

Select HubKit from Gravio Studio and open IVAR Message Subscribing Configuration from the device panel.
To add DNS name/IP address, enter the address of the PC where IVAR/BAP is installed.
To add the IVAR server ID, paste the ID you just copied.
Click the Add button to register.
Then copy the HubKit Endpoint.

Select Events in IVAR to open Subscriptions
Press the + button.

Enable and open Event Types Selection and select All Events.

Change the Protocol to HTTPS and pace the HubKit Endpoint you just copied to the URL.
Press the Save button to save.

Once saved, it will be displayed in the event list.
Click the trash can icon to delete.

5. Event registration

Select a device in Gravio Studio and add areas and layers.
Select IVAR as the layer and press the save button.

Activates the saved IVAR layer.

6. Confirm event reception in Data Viewer in Gravio Studio

Open the data viewer and verify that IVAR is sending the detected events.