Setting up IVAR Triggers

7. Creating an action to be called by IVAR

Create an action to call on the IVAR trigger. In this example, we will create an action that triggers a Slack message. If you have Slack integrated, this is an easy way to confirm that the action has been triggered.

8. Setting IVAR Trigger

Select IVAR Trigger and press + button to open Add New IVAR Trigger.
Select the action, area, and layer according to the setting value, and when counting the number of people, select PEOPLE_COUNTING_ANY as the event type.
Enter conditions such as >1 and >0 for the number of people.
Press the save button to save.

Activate the saved IVAR trigger.

9. Confirm execution of action in IVAR trigger

The specified action is executed when an event that is enabled and matches the IVAR trigger condition is sent from IVAR.

Since we are triggering a Slack component in this example, a Slack notification will should be triggered.