The Gravio Light Action Component is to control a Gravio Lights. For this component to work, you must have the Gravio Lights paired in advance.
| Output Payload | Description |
|---|---|
cv.Payload |
Outputs the output payload of the previous component as is. (Pass-through) |
Component Properties
| Name | Required | Description |
|---|---|---|
| Device | False | Devices as defined in the Base Property Profile |
| DeviceId | True | If not taken from the Base Property Profile, define here the device IDs to be turned on/off. If none are configured, all paired Gravio Lights will be affected. Multiple device IDs can be separated by commas. For example 32-40-00-FE-FF-57-B4-14,32-40-00-FE-FF-57-B4-15 |
| On | True | Specify if the lights should be on or off. The value specified for cp.On is “true” or “false”. |
| Color | True | Predefined Colors. cp.Color property’s value can be “red”, “yellow”, “green”, or “blue “ string. |
| Brightness | True | Brightness in %age |
Note: If the light is not reacting initially, try setting it off and then on again using an action.
Need more help with this?
Join our slack community for help