How to set up the Panasonic i-PRO Camera for Motion Detection, Congestion and Alarms

The camera used is the WV-S1135V for i-PRO camera settings.

Access the WV-S1135V camera’s web page to open the settings. Please refer to the i-PRO manual for instructions on how to use the WV-S1135V and how to operate the web page.

AI Motion Detection

To use AI motion detection, you need to install AI-VMD (WV-XAE200WUX) on the camera.
Please use version 3.2 or higher.

For AI motion detection settings that detect AI-recognized actions, count function settings, detailed settings, etc., please refer to the i-PRO manual for how to set up on the i-PRO side.
To integrate with Gravio, open the count function settings screen.

Please register the URL of Gravio’s i-PRO settings screen for HTTP transmission.

AI Congestion Detection

To use AI congestion detection, you need to install WV-XAE207W on the camera.
Please use version 1.6 or higher.

For basic settings that detect AI-recognized actions, MQTT transmission settings, detailed settings, etc., please refer to the i-PRO manual for how to set up on the i-PRO side.
To integrate with Gravio, open the HTTP transmission screen.

Please register the URL of Gravio’s i-PRO settings screen as the transmission destination.

Alarms

Alarms are set up from the menu to set the motion detection area for the alarm and open notifications.
Please register the URL of Gravio’s i-PRO settings screen for HTTP alarm notifications.