The Patlite Action Component is to control a PATLITE network device including audio. The watchtower must support HTTP commands. For more information, please visit the Patlite website. https://www.patlite.co.jp/
PATLITEs are useful to control the display according to the information from the sensors.
| Output Payload | Description |
|---|---|
cv.Payload |
Outputs the output payload of the previous component as is. (Pass-through) |
Component Properties
| Name | Required | Description |
|---|---|---|
| IP address | True | The IP address of the watchtower |
| Red | True | Set to either On/Off/Blink1/Blink2/No Change. [The values to set for cp.Red are “off”, “on”, “blink-1”, “blink-2”, “no-change”]. |
| Amber | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp. Amber are “off”, “on”, “blink-1”, “blink-2”, “no-change”]. |
| Green | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp. Green are “off”, “on”, “blink-1”, “blink-2”, “no-change”]. |
| Blue | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp.Blue are “off”, “on”, “blink-1”, “blink-2”, “no-change”]. |
| White | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp.White are “off”, “on”, “blink-1”, “blink-2”, “no-change”]. |
| Play Sound | True | Play Sound |
| Sound Channel | True | Specify the channel to be played back using numbers. For details, see the manual for the device. |
| Repeat | True | Specifies the number of additional repetitions. If you don’t want to repeat it, leave it blank. |
| Timeout | False | Timeout (ms) |
Need more help with this?
Join our slack community for help