Search
Related topics are listed below.
Connect to WiFi using an SD Card
Gravio Hub (Gravio Hub 2) » Connect to WiFi using an SD Card
Starting with version 5.0.2 of Gravio, you can set up the Wifi for Gravio Hub2 using an SD card. Setup Procedure Please save the following three lines in a file named “wificonfig.txt.” Replace the blue parts with details specific to your…
Configure the Gravio Hub using an SD card
Gravio Hub (Gravio Hub 2) » Configure the Gravio Hub using an SD card
Setup Procedure Please write the following four lines and save the file as “ghubconfig.txt.” Modify the blue parts to fit your environment. ———- ghubconfig.txt ———— enable-ssh true or false restore-backup backup…
How to restore Gravio Hub X64 to factory settings using SD card
Gravio Hub (Gravio Hub X64) » How to restore Gravio Hub X64 to factory settings using SD card
This document explains the steps to restore the Gravio Hub X64 to its factory settings using an SDCard. Connect a display and keyboard to the Gravio Hub X64. Insert the SDCard included in the Gravio Hub X64 package into the SDCard slot of the Gravio Hub X64. Press…
Factory Reset the Gravio Hub 2
Gravio Hub (Gravio Hub 2) » Factory Reset the Gravio Hub 2
Since the release of Gravio 5.0.2, an SD card for resetting the Gravio Hub2 to factory settings has been included. (If the SD card is not included, please contact our support, and we will send it separately.) Initialization Procedure Insert the blue-labeled SD card…
Gravio Hub Settings
Installation and Setup » Determining how to operate the Gravio Hub 2 and the steps to set it up » Gravio Hub Settings
The Gravio Configuration Manager is a web application bundled with HubKit. Therefore, in order to manage this system securely, the Gravio Configuration Manager has a dedicated account. Open the Configuration Manager by typing…
Indicator light status and button operation on Gravio Hub 2
Gravio Hub (Gravio Hub 2) » Indicator light status and button operation on Gravio Hub 2
indicator light status The LEDs on the side of the Gravio Hub 2 light up in various colors and patterns to indicate the following LED Status Comment blue when first booted out of the box Access point mode White light on…
Setup HubKit 4.3 on Linux / Raspberry Pi
Installation and Setup » Past HubKit installation and upgrade procedures » Setup HubKit 4.3 on Linux / Raspberry Pi
Linux / RaspberryPI Installation of HubKit 4.3 and Coordinator 2.6 We have created a .deb package for the installation. This makes the installation of HubKit 4.3 very easy on Linux. Please note that if you use a Raspberry Pi, you must have a 64bit Raspberry Pi.…