With this component, you can Bind or Unbind a device to an area/layer from an Action. This is useful to enable/disable data input streams, especially cameras, as they cannot usually be bound to a layer while a video is being taken from a component.
Display the device list in advance and check the physical device ID of the connected camera.
Component Properties
| Property Name | Description |
|---|---|
| Field | Specify the device to which the binding is to be applied, either by device ID or logical device ID. |
| Device ID | Specify the device to which the binding is to be applied by device ID. |
| Logical Device ID | Specify the device to which the binding is to be applied by logical device ID. |
| On/Off | Specifies whether to turn on or off the bind for the specified device (if there are no changes, the setting will not be changed) |
Need more help with this?
Join our slack community for help