Saving Media data path for Camera device

Images acquired from the camera by ONVIF or USB will be stored in the following directory for each camera device and stored in each date directory.

Windows 10

C:/ProgramData/HubKit/mediadata

Mac

/Library/Application Support/HubKit/mediadata

Linux/Raspberry/Gravio Hub

On Linux/Raspberry, since it runs on Docker, the following directories are mounted as volumes
/home/gravio/hubkitrepo4/data/mediadata

When viewed from within Docker, the directory is
/var/opt/hubkit/mediadata
directory.

If you like the path of the image to be stored in the sensor database, you will need to add a Camera layer and assign the camera to that layer. Note, for data to be captured in the database, it needs to be in a layer.

Also if you like your harddisk not to be filled up, you can set the amount of days the pictures should be stored under “Settings” then “Disk Management”.

You can find more about how to setup a ONVIF Camera by watching this video: https://www.youtube.com/watch?v=8dkSIz_5810