Gravio Settings

Open the Configuration Manager using a browser on Gravio Hub X64.

In the browser, enter “:8080” as set in the previous chapter.

After logging in, the Gravio Hub X64 Settings screen will open, so open the Gravio Settings menu.

• This menu will not be displayed in HubKit Windows/Mac.
  

HubKit Information

You can check the HubKitID of HubKit.
When you press the copy button, it will be copied to the clipboard, so you can use it when entering the HubKitID on Gravio.com.
　

Gravio HubKit / Gravio Coordinator Status

You can check the status of the HubKit and Coordinator services.

Use the switch to start/stop the HubKit and Coordinator services respectively.

Software Update

You can update the software for the coordinator and HubKit.

Select the version of the HubKit and coordinator software you want to update, and then click the Install button. When the installation is complete, click the Restart button.
Or, select the version of the Zigbee firmware you want to update, and then click the Install button. When the installation is complete, you can use it as is.
　

Changing the Coordinator Certificate

The Coordinator comes with a self-signed certificate installed by default, but you can change this to a certificate for your own domain.
Prepare the key file and certificate file in advance.

Leave the “Use SSL” option in the certificate settings turned on, and upload the key file and certificate file to the SSL certificate.
When the upload is complete, the certificate update will be complete.

Proxy Settings

Set this if you need to use a proxy server when using HubKit’s internet services.

When you press the settings button, the settings screen will appear, so enter the account information (proxy URL, account, password) for the proxy server to be used for each of the HTTPS and HTTP protocols.

• HubKit must be stopped in order to set this item.

HubKit Data Backup

You can back up and restore HubKit data on your local PC.

To back up HubKit / Coordinator data, click the Backup button. After a short while, the backup will be complete, and you can download the backed up file to your local PC by clicking the Export button.
To restore the backed up data, click the file selection button for the import file and select the file. Click the import button and the file will be uploaded and restored after a short while.

• Be sure to specify the backed up file when importing.
• Please use the same version of the Gravio Hub Zigbee firmware for the backup source and restore destination.　
  　

Gravio HubKit Support Log

You can download the HubKit and syslog log files as a zip file.

To download the log files, click the Export button.

Gravio Hub X64 Power Management

Turn off the Gravio Hub.
　
　

Pressing the power off button will automatically turn off the Gravio Hub.
Pressing the restart button will restart the Gravio Hub.

Bluetooth Settings

This will connect to a Bluetooth device (e.g. speakers) that you want to use with Gravio Hub X64.
To pair with the Bluetooth device, first put the device into pairing mode and press the “Scan” button.
Wait a moment and the Bluetooth device will appear in the available devices, so press the “Pair” button.
When pairing is complete, press the “Connect” button to connect to the device.

Audio Settings

You can play sound by connecting an external speaker with a built-in amplifier to the earphone jack of the Gravio Hub X64.
You can use it by connecting an external speaker with a built-in amplifier to the earphone jack and pressing “Use” in the device row of the relevant speaker to set it.
You can check whether sound is coming out by pressing the “Play” button.