This section will discuss the initial setup of Gravio Hub.

To use the Gravio Hub, you will need to do the following two things.

  1. Configure WiFi network settings to connect Gravio Hub to your network.
  2. Gravio Hub is running on a LinuxOS based on Ubuntu1804. It is designed to log in to LinuxOS as needed. For this reason, we ask that you change the password for your login account to login to Linux in the initial settings when you use it to increase security.

Please prepare your WiFi network settings (network name and password to connect to) and the new password for the login account in advance.
Note: Please save the password for your new login account in a safe place. If you lose the password, you will not be able to log in to Linux.

To configure these settings, we have prepared a function and an application that allows you to do so from your iOS or Android device.
Please follow the instructions below to set them up.

The following accessories are rented with the Gravio Hub, including the following Gravio Hub

  • Gravio Hub main unit
  • Gravio USB-C adapter !
  • Gravio USB-C Cable
  • Power supply box !

The Gravio Hub has one USB-C connector to which you can connect a USB-C adapter or a USB-C cable.

When connecting the USB-C cable to the power cable only

Connect the power box to the power supply by making the following connections.

installing the Gravio Hub in the LAN

Connect the Gravio Hub to the power supply and start it up.

Need more help with this?
Join our slack community for help

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.