Gravio Hub Settings

Gravio Configuration Manager is a web application included in HubKit.
For this reason, in order to safely manage this system, a dedicated account has been prepared for %(marker-red)Gravio Configuration Manager.

Open the configuration manager by entering “http://ip address:8080” in your browser.

Username: “gravio”
Password: ”gravio”
Log in with these details.

　
When you first log in, a panel will appear to change your password, so enter your current password and new password, and then press the “Change Password” button. From now on, you will use the new password.
(It is also possible to enter the WiFi access point name and set it.)-

When you log in, the Gravio Hub Settings screen will open.

• This menu will not be displayed on HubKit Windows/Mac/Linux/RaspberryPI.
  

Time Settings

Next, set the host name in the host name settings. On the screen, set it to “graviox64”, so you can access it with “graviox64.local”.

Gravio Hub Internet Settings

If your WiFi access point name is displayed in the WiFi network name, select it, enter the WiFi password, and press the “Set” button to add the Gravio Hub to your WiFi network.

If you are using a fixed IP address, turn off DHCP and enter the fixed IP address, default gateway, and DNS server in the Static IP Address field.

When you have finished entering the information, click the “Set” button.

A message dialog will appear, so click “Go”.
The Gravio Hub will reboot, and then connect to the specified network and complete startup.
Connect a keyboard and display to the Gravio Hub X64, and
Username: gravio
Password: (the password you set for yourself)
and log in to the console.
After that, enter “ip addr” from the console to check the IP address of this Gravio Hub, and enter “http:/assigned IP address:8080” from your browser to open the Gravio Configuration Manager again.

If the PC on which Gravio Studio is installed is connected to the same network as the network set in Gravio Hub X64 after rebooting, start Gravio Studio and update the Hub list to display Gravio Hub.
The network settings are now complete.

(We recommend using a fixed IP address.)

• If a LAN cable is connected to the wired LAN terminal, the wired LAN settings will be used.
  If there is no LAN cable connected to the wired LAN terminal, the wireless LAN setting will be used.
  If a fixed IP is set when a wired LAN cable is connected, the wired LAN will always be used. (Even if a fixed IP is set for WiFi, WiFi cannot be used unless the fixed IP setting for the wired LAN is released and the DHCP setting is used.
  

Using SSH

Turn on SSH when connecting to Gravio Hub X64 via SSH. (The Gravio Hub will need to be restarted after turning on SSH.)

Automatic Shutdown Settings

This setting will automatically shut down the Gravio Hub X64 at the specified time and turn off the power. Use this setting if you are operating the device in a factory or other environment where the main power is turned off every day.

The installation is now complete.