To restrict Gravio Studio access to the Gravio Hub, install the Gravio Studio client certificate used for the that particular Gravio Hub.
Note: This feature is available only in Gravio Basic, Gravio Standard and Gravio Enterprise subscriptions.

  1. Log in to Gravio Cloud with Gravio Studio and select “Client Certificate” from the menu:
  2. Enter a Credential Key (= password) at the bottom and press the “Generate” button to create a certificate.
  3. Select “Download Certificate File” to download the certificate to your PC.

For MacOS

Put the downloaded certificate in the following directory.
/Library/Application Support/HubKit/clientcert

Open the “Settings…” menu in the Gravio HubKit Toolbar application, and select the “Connection” tab and check the “Use client authentication” checkbox.
After that, start the HubKit.

For Gravio Hub / Linux

Login via SSH, and put the downloaded certificate in the following directory.

Create “config.json” file which contains the following information in “/home/gravio/hubkitrepo4/etc/ctrlmgr/conf” directory

{ "Client" : { "UseClientCertificates" : true } }

Then Restart Gravio Hub

After registering the certificate to the Hub, restart the Gravio HubKit. Restarting will enable client authentication.

Need more help with this?
Join our slack community for help

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.