The Gravio Light Action Component is to control a Gravio Lights. For this component to work, you must have the Gravio Lights paired in advance.

Output Payload Description
cv.Payload Outputs the output payload of the previous component as is. (Pass-through)

Component Properties

Name Required Description
Device False Devices as defined in the Base Property Profile
DeviceId True If not taken from the Base Property Profile, define here the device IDs to be turned on/off. If none are configured, all paired Gravio Lights will be affected. Multiple device IDs can be separated by commas. For example 32-40-00-FE-FF-57-B4-14,32-40-00-FE-FF-57-B4-15
On True Specify if the lights should be on or off. The value specified for cp.On is “true” or “false”.
Color True Predefined Colors. cp.Color property’s value can be “red”, “yellow”, “green”, or “blue “ string.
Brightness True Brightness in %age

Note: If the light is not reacting initially, try setting it off and then on again using an action.

Need more help with this?
Join our slack community for help

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.