HubKit Configuration Guide
1. If you are using Mac
Select the ‘Settings’ menu from the HubKit icon in the top menu bar of macOS.
1. Services
Use this when you need to start or stop the services that make up the HubKit individually. If you want to display a warning when a service is stopped at the time of launching HubKit, select ‘Show Service Stop Warning at Startup’.
2. Connection
Select ‘Use Client Authentication’ if you want to restrict the Gravio Studio that connects to the HubKit. For instructions on how to install the certificate, refer to If you want to restrict access from Gravio Studio to the hub.
*Please stop HubKit if it is running.
3. Proxy
Set this if you need to route HubKit through a proxy server when using internet services. Enter the account information (proxy URL, username, password) for the Proxy server to be used for each of the HTTPS and HTTP protocols.
*HubKit must be stopped to configure this setting.
4. Zigbee
Press the ‘Backup Now’ button to backup pairing information from the Zigbee dongle’s sensor when you want to backup or transfer to another dongle. If you want to restore the backup pairing information, select the backup content and press the ‘Restore’ button.
*Please stop HubKit if it is running.
5. Firmware
Refer to How to update Zigbee firmware for firmware updates.
6. Update
Set the timing to regularly check if there is a newer version of HubKit. Press the ‘Check Now’ button to check immediately for the latest version.
A confirmation dialog will be displayed if there is a newer version. Follow the menu to install if you choose to update.
2. If you are using Windows
Execute ‘GravioTools4’ from the ‘GravioHubKit’ menu in the Windows10 start menu.
When GravioTools4 starts, an icon is displayed in the task bar. Right-click to display the menu and select the ‘Settings’ menu.
1. Services
Use this when you need to start or stop the services that make up the HubKit individually. If you want to display a warning when a service is stopped at the time of launching HubKit, select ‘Show Service Stop Warning at Startup’.
2. Connection
Select ‘Use Client Authentication’ if you want to restrict the Gravio Studio that connects to the HubKit. For instructions on how to install the certificate, refer to If you want to restrict access from Gravio Studio to the hub.
*Please stop HubKit if it is running.
3. Firmware
Refer to How to update Zigbee firmware for firmware updates.
4. Proxy
Set this if you need to route HubKit through a proxy server when using internet services. Enter the account information (proxy URL, username, password) for the Proxy server to be used for each of the HTTPS and HTTP protocols.
*HubKit must be stopped to configure this setting.
5. Zigbee
Press the ‘Backup Now’ button to backup pairing information from the Zigbee dongle’s sensor when you want to backup or transfer to another dongle. If you want to restore the backup pairing information, select the backup content and press the ‘Restore’ button.
*Please stop HubKit if it is running.
6. Update
When GravioTools4 starts, an icon is displayed in the task bar. Right-click to display the menu and select ‘Download the latest version’.
A confirmation dialog will be displayed if there is a newer version. Follow the menu to install if you choose to update.
7. Restarting HubKit
You can restart hubkit either via Mac Menu app or Windows Tray app, or you can open the Configuration Manager using the IP address followed by the port :8080 , where you can see the toggle to switch HubKit or the Coordinator off and on again.
Need more help with this?
Join our slack community for help