On this page, we will go through the process of setting up your Gravio Hub. We made it extremely simple to configure your new hub.

The following two steps are needed to get started:

  1. Configure the Gravio Hub to connect to your WiFi network
  2. Set your password

The Gravio Hub runs on a Linux based OS (Ubuntu). Resetting the password will ensure that your Gravio Hub is secured at Linux security grade if you choose a secure password.

There are two ways you can set up your Gravio Hub:

  1. You can use the wifi network the Gravio Hub creates
  2. You can connect the USB-C adapter to the Gravio Hub, which allows you to connect a USB Keyboard, Mouse and an HDMI Screen. With this setup you can use the graphical user interface to configure your Gravio Hub.

The Gravio Hub comes with the following accessories:

The Gravio Hub

Gravio Hub

The USB-C adapter

Gravio USB-C Adapter

The Gravio USB-C cable

Gravio USB-C Cable

The power supply

Gravio Power Adapter

The Setup Process

Gravio Hub can be set up either via Wifi or via LAN. For the LAN setup, you will need a USB to Ethernet adapter, which you will connect to the USB-C Adapter. If you like to use camera feeds, we recommend you use the LAN connection. Please follow the instructions on the next page to connect your Gravio Hub to the network.

Need more help with this?
Join our slack community for help

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.