HubKit for Linux can be operated as a Gravio HubKit Node on a Raspberry Pi.
- Follow the instructions from the Linux ARM64 installation manual. Note, if you already have Gravio Studio, and just need to install the HubKit software, you can download this from https://www.gravio.com/en/download
- Open the Initial Setup screen to deploy your Gravio license.
- Register your Gravio HubKit Node with the Coordinator
If you have a Gravio coordinator, you can register your HubKit on the Coordinator by entering the server address of the Coordinator and clicking the Register button.
To complete the registration of HubKit in the Coordinator, approval by the Coordinator is required.
This completes the setup of the operating environment.
Need more help with this?
Join our slack community for help